* Even when high speed or low speed, it keeps high torque.
* It’s possible to upgrade to semi-automatic system with SP-L1 or SP-As1.
* Easy to exchange discs and easy to manual polish as polishing table is designed at high position.
* IMT Polishers have been manufactured in our factory.<
* [Made in Japan]<
Disc size | Grinding Disc: dia.200,223 or 250mm Polishing Disc: dia.200 or 250mm Magnetic Disc: dia.200 or 250mm ※Disc is option |
---|---|
Rotation Speed | 0 to 400rpm |
Optional unit | IM-P2 can equip SP-L1 or SP-As1. |
Power supply | 1 phase 100V or 1 phase 220V 50/60Hz |
Size/whight | W390mm×D655mm×H195mm 31Kg |
* SP-L1 can change the rotation speed of head holder.
* SP-L1 is installed onto IM-P2 and used.
* Polishing face of specimens doesn’t become tilted or cause a pencil-like shape.
* It’s possible to select and set 1 to 3 of specimens.
* Compact design! You can use in manual and semi-automatic polishing.
* [Made in Japan]<
Rotation speed | 0 to 200rpm |
---|---|
Number of specimen | Max 3 specimens |
Specimen Holder | φ25 or 30 or 40mm × 3 specimens each ※Production of inch or custom size is possible. |
Power supply | 1 phase 100V or 1 phase 220V |
Size / Weight | W460×D655×H550mm / 50kg *IM-P2&SP-L1 |
* Total load system.
* It can change the rotation speed of specimen holder.
* Double button start switch for human safety.
* Can memorize the polishing conditions of up to 16.
* Automatic lubricator is attached as standard equipment. (Possible to input and adjust the drip frequency and quantity)
* Three different movements can be programmed to a single polishing process. ( ABC setting )
* [Made in Japan]<
Disc size | Grinding disc:φ310mm / Polishing disc:φ300mm / Magnetic Disc:φ300mm *Disc is option |
---|---|
Number of specimen | Standard number is 6 specimens. |
Rotation speed | Disc:50 to 400rpm / Holder:50 to 200rpm |
Pressure | 50 to 400N |
Operation | Automatic start by pushing the double buttons of left and right |
Lubricator/ Primary Air Source | Auto drip Lubricator (Standard attachment) Required (Air supply of 0.5 to 0.7 Mpa) |
Power supply | 3 phase 200-220V or 1 phase 200-220V |
Size / Weight | W600×D745×H675mm / 105kg |
* Even when high speed or low speed, It keeps high torque.
* It is possible to change the rotation speed.
* Easy to manual-polish as polishing tables are designed at high position.
* Both of water taps are on the left side..
* Two discs type sample grinding and polishing machine
* [Made in Japan]<
Disc size | Grinding Disc: dia.200,223mm Polishing Disc: dia.200 Magnetic Disc: dia.200 *Disc is option |
---|---|
Rotation Speed | 0 to 400rpm |
Power supply | 1 phase 100V or 1 phase 200-220V 50/60Hz |
Size/whight | W760mm×D700mm×H240mm 63Kg |
* Wind like air knife dries quickly specimens.
* Blowing wind quickly changes into hot air.
* Optional ‘Foot switch’ can be installed.
* Compact body ! [Made in Japan]
* GI-10, User-friendly mounting press.
* Built-in a cooling pipe. -Mounting of acrylic resin is possible.
* Auto-stop timer of heater is installed.
* Adjustable heating temperature.
* Handy hydraulic jack which gives pressure is quite few troubles.
* As a top closure is united with arm gate, it does not need to be put on the desk.
* [made in Japan]
* Magnetic adsorption system which has been developed as substitution of Sic paper.
* Use with only cooling water.
* High efficiency and supreme surface flatness of specimen
* Using Cyhawk #1500 replaces intermediate polishing of “Diamond slurry + polishing cloth”
* Very long life (150 pcs. of Sic Paper of equivalence)
* [Made in Japan]<
Head code | Size | Grit |
---|---|---|
S30SR-20080 | φ200mm | #80 |
S30SR-200220 | #220 | |
S30SR-200600 | #600 | |
S30SR-2001500 | #1500 | |
S30SR-25080 | φ250mm | #80 |
S30SR-250220 | #220 | |
S30SR-250600 | #600 | |
S30SR-2501500 | #1500 | |
S30SR-30080 | φ300mm | #80 |
S30SR-300220 | #220 | |
S30SR-300600 | #600 | |
S30SR-3001500 | #1500 |