VERTICAL RECTLINEAR POLISHERS FOR ROUND EDGES UP TO 4 CM THICKNESS AND FLAT EDGES UP TO 6 CM THICKNESS
Extreme compactness, simplicity, cheapness, and reliability are the main features of these torus-polishing machines. Hydraulic motors and lever system - 1987 MM SpA patent - for the oscillation of the mandrel-holding beam. Shaping of round convex edges by a single cup-shaped diamond wheel for shape copying and shaping of "OGEE" profiles with shaped diamond wheel. Micro oscillation system for flat edges and/or portions of flat edges. Right for even soft materials thanks to the good sliding sensitivity of the polishing mandrels.
Particularly right for small spaces and processing of 2-3-4 cm thick slabs.
1- Dimensions: from 3497x1150 mm
2- Power: from 19 kW.
LCV
VERTICAL RECTILINEAR POLISHERS FOR FLAT EDGES UP TO 6 CM THICKNESS
Extremely compact and cheap, LCV is an edge-polishing machine very simple to use, install, and maintain. It is particularly right for small spaces and works on 2-3-4 cm thick slabs. Neither foundations nor draining slopes are required.
1- Several available models: with drip-cutting heads; with heads calibrating the thickness; with shaping heads, etc. At request there can be additional heads: 9 polishing heads and 3+3 chamfering heads max.
2- Dimensions: from 2450x1185 mm onwards
3- Power: from 6.8 kW onwards
LTV
VERTICAL RECTILINEAR POLISHER FOR ROUND AND FLAT EDGES UP TO 6 CM THICKNESS
The compactness, the shaping of round edges by a single cup-shaped diamond wheel for all radiuses, and the micro oscillation of the polishing mandrels for flat edges and portions of flat edges (e.g. between two radiuses) are the main features of this torus-polishing machine.
Reliability derives from the technical solutions MM has successfully tested in the years on thousands of machines (hydraulic motors and lever system - 1987 MM SpA patent - for the oscillation of the mandrel-holding beam). Right for even soft materials thanks to the good sliding sensitivity of the polishing mandrels.
The above-mentioned features, the reasonable price, and the working quality make this machine ideal for average output of slabs with a thickness up to 6 cm.
Particularly right for small spaces and processing of 2-3-4 cm thick slabs.
1- Dimensions: 4100x1330 mm
2- Power: from 21 kW onwards
LCT
HORIZONTAL RECTILINEAR POLISHERS FOR ROUND AND FLAT EDGES UP TO 6 CM THICKNESS
The compactness, the shaping of round edges by a single cup-shaped diamond wheel for all radiuses, and the micro oscillation of the polishing mandrels for flat edges and portions of flat edges (e.g. included between two radiuses) are the main features of these torus-polishing machines. Reliability derives from the technical solutions MM has successfully tested in the years on thousands of machines (hydraulic motors and lever system - 1987 MM SpA patent - for the oscillation of the mandrel-holding beam). The good sliding sensitivity of the polishing mandrels makes these machines right even for soft materials. The above-mentioned features, the reasonable prices, and quality, make these machines ideal for average output of slabs with a thickness up to 6 cm.
Particularly right for small spaces and processing of 2-3-4 cm thick slabs.
1- Available models: with heads performing each kind of additional processing together with the continuous polishing of linear edges (dripstone, thickness calibration, non-slip routers, blade cutting, etc.)
2- Dimensions: from 3930x1510 mm onwards
3- Power: from 21.2 Kw
LTZ
HORIZONTAL RECTILINEAR POLISHERS FOR ROUND AND FLAT EDGES UP TO 10 CM THICKNESS
High performance and reliability are the main features of these torus-polishing machines. Round edges re shaped by 2 cup-shaped diamond wheels (150 mm diameter) whose positioning is completely automatic. - Micro oscillation system for flat edges and/or portions of flat edges. - Electronic control of the pneumatic mandrels (possibility of setting the beginning and the end of a processing, and the individual advances and delays) with TOUCH SCREEN control panel. - Right for high output (at the height of its grade), for the processing of thicknesses beyond 6 cm (up to 10 cm), and for the processing of soft materials thanks to the good sliding sensitivity of the polishing mandrels.
Particularly right for small spaces and processing of 2-3-4 cm thick slabs.
1- Available models: with heads performing each kind of additional processing together with the continuous polishing of linear edges (dripstone, thickness calibration, non-slip routers, blade cutting, etc.)
2- Dimensions: from 4950x1860 mm onwards
3- Power: from 34 kW onwards